In this guide check out how you can restore bathroom vanities, vanity top, toilet easily with these bathroom restoration basic tips.
The bathroom renovations are a way to improve the resale value of your home in a relatively small budget. Replacing an old vanity or dressing table or updating of land cover or wall can make a big impact for only a few hundred dollars. Better yet, a dedicated homeowner with a spare weekend can finish most bathroom remodeling projects.
Replacing a Vanity
Often a bathroom remodeling projects involve repairing an old vanity. To replace the vanity, turn off the hot and cold water to the sink using the valves off on the vanity. Place a bucket under the pipes and remove the trap attached to the drain as well as water supplies using an adjustable wrench.
The next step is to use a utility knife to loosen the seal between the top and sides of the vanities and wall. Pull the sink and vanity top away from the wall and discard. Remove the screws that attach the vanity cabinet to the wall and remove that too. Now locate the studs in the walls of the bathroom using a stud finder. Mark them, and move the new cabinet of the vanity in the bathroom instead. Drill through the cabinet and into the studs to secure the vanity to the wall, making sure the vanity is level and shim as necessary.
Replacing the Vanity Top
To do this, run a bead of silicone caulk around the top edges of the vanity cabinet and wall where the cover joins. Then put the vanity top gently into place, making sure not to smear caulk on the wall. A supply pipe and drain water to the new vanity, using Teflon tape on the threads and an adjustable wrench to tighten as needed.
Replacing a Toilet
A basic bathroom remodeling project that is easily done by most home owners are replacing the toilet. To do this, you will need a new toilet and a new seal ring toilet wax. Once you have those two items, turn off the water supply to your toilet. Then clean your toilet with running water and remove any remaining water with a sponge: you want to make sure the toilet is completely empty before proceeding. Remove the coupling nut that connects the water supply to the toilet with an adjustable wrench. Then, separate the bolts holding the tank to the toilet bowl. Remove and discard the old tank.
Next, remove the bolts that attach the toilet bowl to the floor. There are always at least two bolts, and often four, so be sure to remove them all. Swing the bowl slightly to break the old wax seal before lifting the bowl and throw it away too freely. Fill the hole exposed with rags to prevent sewer gases from escaping into your home. Before proceeding with the bathroom remodeling, be sure to clean the area where he was the toilet. Remove the old wax seal and caulk or any dirt that surrounded the old toilet. Then, test fitted with the new bowl and place it on the rim is checking for leveling. Make any adjustments needed with metal washers.
Also Read – Bathroom Remodeling Check List
Now you can finish this bathroom remodeling project by installing the new toilet. Start putting the new wax seal at the bottom of the toilet bowl. Then, remove the rags and nods carefully the toilet bowl on the flange, using a rocking motion to make a good seal. Use bolts that came with maintaining your toilet fix the toilet instead. Then a toilet tank using bolts that came with your kit attaches it to the bowl. With an adjustable wrench, reattach the water supply to the toilet tank. Caulk around the base of the toilet that uses a high quality silicone caulk made for using the bathroom and your bathroom remodeling project is complete.
Updating Land Cover and Wall
Many homeowners interested in remodeling bathroom taking a chance when the toilet is being replaced to update the land cover and wall as well. If you are looking to add value to your home with your bathroom remodeling, a good quality tile in a neutral color is best for the floor. The best wall coverings bathroom remodeling projects varies, but homeowners often continue using the tile at least the lower half of the walls. This allows the piece of the wall is protected against water damage and maintains the factor easy cleaning of the tile. Any color you want to add for your bathroom remodeling project can be done with paint or wallpaper on the upper half of the wall.
If the bathroom that you are working on is not the only bathroom in your home, consider the addressing of basic bathroom remodeling work yourself. However, if you only have one bathroom in your home, or you do not have the time to devote to these projects, contact with a professional who can finish your bathroom remodeling quickly.